To add a block, drag it into one of the dashed boxes
The position of the oven ist always on the side of the fireplace connection
Not available for glass-ceramic
Attention: for safe installation between pieces of furniture, ventilation slots must be made in the back of the cooker rim to guarantee correct rear ventilation. If a rear wall is installed by the customer, please indicate the thickness so that the slots are not covered. If the kitchen stove is not installed or if the rear ventilation slits are not required, please indicate them in the notes.
Attenzione: indispensabile se la stufa è incassatatra muro e mobili
(1) with CERAN glass-ceramic plate (+€)
Telescopic baseboard not available if height is > 910mm Telescopic base for monobloc not available
Not available for: Ökoalpin 50 stove or Heating Stove 60
Per piastra in acciaio o in vetroceramica
With a 40 mm worktop and a radius R15 or R20, the boring ring holder RH05 is no longer possible. With a 30 mm worktop and a radius of R10 or R15, the RH05 boring ring holder is no longer possible. In these cases, we recommend the RH03 sling holder.
The viewed side of the furniture is lengthened with a stainless steel strip
A fixed base in mounted instead of the height adjustable one
Accetto l’informativa sulla privacy
{{data.vueConfigurazione}}
{{data.vuePicConf}}
Do you really want to delete this element?
Modify element
* Only blocks of equal or greater than 80
Choose the hob in the section, if this is another brand of carving enter measurements and model in the notes at the bottom of the page.
