Cucina economica, termocucina e cucina a legna
Dal 1937 cucina economica di qualità
Quando nel 1937 Franz Pertinger decise di produrre le sue prime cucina economica , poteva già contare su una vasta esperienza come fabbro dedito alla creazione di manufatti
in ferro battuto.
Heating stoves
WHILE IT WARMS THE HOME OR COOKS YOUR FOOD EXCELLENTLY, YOUR HEATING STOVE IS PRODUCING HOT WATER FOR ALL YOUR FAMILY'S NEEDS - FOR THE BATHROOM AND FOR THE RADIATORS. SIMPLY CONNECT IT TO THE CENTRALISED SYSTEM AND YOU CAN ENJOY ALL THESE ADVANTAGES IMMEDIATELY, ALSO COUPLING IT WITH OTHER TYPES OF HEAT GENERATING ELEMENTS IF YOU WANT, SUCH AS A BOILER OR SOLAR PANELS.
Comfort, saving, safety and all the hot water you want
The combustion chamber of the heating stove has a special exchanger that can produce really high temperatures (thanks to double combustion) that heat the water inside it incredibly quickly. The functioning system is the same as that of the bio-firebox which guarantees extremely high efficiency with minimum emissions and complete respect for the environment. The water produced is then let into the system by an external pump* controlled by the heating stove's electronic control unit. Particular attention has been dedicated to safety: the exchanger has, as a standard feature, a sealed circuit in copper that, by means of the connection to a heat discharge, allows the passage of cold water that lowers the temperature of the internal boiler in the case of overheating and increases the pressure, also if there is a power outage. Thanks to the UNI 10412-2 standard, this system ensures safe installation even in heating systems using a closed expansion tank**. All the heating stoves are also equipped with Air System cooled side panels for recessing between units and are also available in the combined monobloc version to fit in perfectly with your furnishing.
* not supplied
** always comply with the standards currently in force in the Country where the appliance is installed
Special, high efficiency
combustion chamber
The high efficiency combustion chamber in refractory bricks offers many advantages.
• Thanks to the properties of this material, it is possible to reach a combustion with extremely high temperatures meaning that the energy yield conveyed to cooking plate and to the oven is comparable to a wood stove without boiler.
• The high temperatures cause an internal pyrolysis that allows the optimal burniing of the wood allowing the complete elimination of the unburned parts generally detected in the ashes and, it also keep the walls of the combustion chamber clean and free of creosote (tartar). Thanks to the door with self-cleaning, triple-pane glass, you can enjoy the beauty of the fire.
• The bricks also act as thermal flywheel for the boiler, thus avoiding abrupt changes in temperature that give rise to condensation and the consequential tar that would ruin the heating stove in just a few years.
• Thanks to high performance combustion generated by the secondary air flow coming from above, there is a considerable reduction of wood consumption.
• It is respedctful of the environment thanks to the low emissions, the heating stove is certified in compliance with the strictest European standards which will come into force by 2015. It has also been certified by the Österreichisches Umweltzeichen as a “GREEN” product. This warranty, quite difficult to achieve guarantees that, in addition to the low emissions, even entire production phase of the heating stoves respects an eco-friendly process.
This special combustion chamber is available in two versions: with fixed or moveable grill (PLUS version).
The latter, in addition to all the above-mentioned benefits, also has the ability to adjust
the depth of the combustion chamber, so as to considerably increase the loading capacity
of the wood. Therefore, in addition to having a greater load capacity, ideal for those who
spend many hours away from home, it also has a greater water-heating power and a very high yield capacity.
